QUICK TURN 200MA L
QUICK TURN turning center series held in high regard by manufacturers around the world since 1981
- Thanks to its design, vibration is minimized during high speed operation to ensure exceptional surface finishes and maximum tool life
- Wide variety of available integral / spindle motor specifications, from standard spindle to high torque spindle for heavy duty machining
- Bolt-on tool holder is standard equipment
- NC tailstock - The low thrust force ensures high accuracy turning even for small diameter shaft workpieces
- MAZATROL SmoothC, the advanced CNC designed for ease of operation - standard equipment
- The MAZATROL SmoothG CNC is optionally available (Standard CNC system varies by market)
- Smooth Technology for unsurpassed ease of operation
Maskine specifikationer
500 mm Bed (Universal) | Værdi | |
---|---|---|
CAPACITY | Chuck size main spindle | 8 " |
Maximum swing | 660 mm | |
Maximum machining diameter | 360 mm | |
Maximum bar size diameter | 65 mm | |
MAIN SPINDLE | Rotating speed maximum | 5,000 min-¹ |
Motor output (30 min rating) | 18.5 kW | |
Motor output (continuous rating) | 15.0 kW | |
Maximum torque | 358.0 Nm | |
TURRET | No of stations on drum turret | 12(all 12 can be driven) |
Mill spindle motor output (continuos rating) | 3.7 kW | |
Mill spindle motor output (40% ED) | 5.5 kW | |
Mill spindle rotating speed maximum | 5,000 min-¹ | |
Mill spindle maximum torque | 47 Nm | |
TAILSTOCK | Center bore (mounting taper) | MT No 5 (Dead centre) |
FEED AXES | Rapid traverse (X axis) | 30 m/min |
Rapid traverse (Z Axis) | 33 m/min | |
Travel (X axis) | 225 mm | |
Travel (Z axis) | 605 mm |
1000 mm Bed (Universal) | Værdi | |
---|---|---|
CAPACITY | Chuck size main spindle | 8 " |
Maximum swing | 660 mm | |
Maximum machining diameter | 360 mm | |
Maximum bar size diameter | 65 mm | |
MAIN SPINDLE | Rotating speed maximum | 5,000 min-¹ |
Motor output (30 min rating) | 18.5 kW | |
Motor output (continuous rating) | 15.0 kW | |
Maximum torque | 358.0 Nm | |
TURRET | No of stations on drum turret | 12(all 12 can be driven) |
Mill spindle motor output (continuos rating) | 3.7 kW | |
Mill spindle motor output (40% ED) | 5.5 kW | |
Mill spindle rotating speed maximum | 5,000 min-¹ | |
Mill spindle maximum torque | 47 Nm | |
TAILSTOCK | Center bore (mounting taper) | MT4 built in centre |
FEED AXES | Rapid traverse (X axis) | 30 m/s |
Rapid traverse (Z Axis) | 33 m/s | |
Travel (X axis) | 225 mm | |
Travel (Z axis) | 1,125 mm |