VCN-530C HS
MAZATROL SmoothG (Option) shown
High Efficiency Vertical Machining Center
VCN-530C HS
- 18000 rpm, 1120N・m (826 ft・lbf), 30kW (40HP) [50%ED] Integral spindle / motor is designed for the high speed machining of aluminum and high speed finish machining of dies and molds.
- Highest productivity in this class of vertical machining centers.
- Reduced cycle times thanks to high speed feedrate, acceleration / deceleration and tool change
- Feedrate 52 m/min (2047 IPM) … spindle speed 18000 rpm
- Tool-to-tool … 1.3 seconds
- Unique Mazak heat compensation system - THERMAL SHIELD
- Excellent accessibility thanks to two front doors providing wide opening - large window for convenient monitoring of machining
- Linear roller guides and ball screw core cooling on the X-, Y-, and Z- axes are standard equipment
- MAZATROL SmoothC, the advanced CNC designed for ease of operation - standard equipment
- The MAZATROL SmoothG CNC is optionally available
* Standard equipment CNC system varies by market
Maskine specifikationer
| Standard Machine | Værdi | |
|---|---|---|
| CAPACITY | Work table cross dimension | 1,300 mm |
| Work table longitudinal dimension | 550 mm | |
| Table: cross-wise travel amount (X-axis) | 1,050 mm | |
| Saddle: back & forth travel amount (Y-axis) | 530 mm | |
| Spindle head: up & down travel amount (Z-axis) | 510 mm | |
| SPINDLE | Spindle taper bore | 7/24 taper No 40 |
| Rotating speed maximum | 18,000 min-¹ | |
| Motor output (50%ED) | 30.0 kW | |
| FEED RATES | Rapid traverse rate (X-axis) | 52 m/min |
| Rapid traverse rate (Y-axis) | 52 m/min | |
| Rapid traverse rate (Z-axis) | 52 m/min | |
| ATC MAGAZINE | Magazine capacity (standard) | 30 |
| Tool shank | CAT/MAS BT-40 | |
| MACHINE SIZE | Width | 2,880 mm |
| Length | 3,211 mm | |