UN-600/30V
Optimized large volume production of automotive components Compact, high-speed horizontal machining center UN-600/30V
- Considerable reduction in the machine width thanks to the X-axis being produced by the interpolation of the Y and C axes
- High-speed cutting
Feedrate(Y, Zaxes / Caxes ) 60 m/min / 100 min-1
Acceleration(Yaxes / Zaxes ) 1.6 G / 1.8 G
- The ball screw cooling system and the standard equipment chiller unit which is used to control the temperature of the spindle motor ensure consistent machining accuracy.
- Prevention of problems caused by the accumulation of machined chips
- Items requiring frequent access, such as the lubrication and air inlets, are in one central location for convenient maintenance to minimize machine down time
- Intermittent operation of hydraulic unit with accumulator results in lower electrical power consumption
Maskine specifikationer
Standard Machine | Værdi | |
---|---|---|
CAPACITY | Maximum workpiece diameter | 600 mm |
Maximum workpiece height | 450 mm | |
Y-axis stroke (column back/forth movement) | 350 mm | |
Z-axis stroke (spindle up/down movement) | 400 mm | |
C-axis (table rotation) travel amount/indexing 0.0001° | 360° | |
SPINDLE | Spindle speed maximum (standard spec.) | 20,000 min-¹ |
FEED RATES | Rapid traverse rate (C) | 100 min-¹ |
TABLE | Table length | 400 mm |
ATC & TOOL MAGAZINE | Tool storage capacity (standard) | 20 |
Tool shank type | MAS BT 30 |