UN-600/30H

Produkt: Horizontal

Optimized large volume production of automotive components Compact, high-speed horizontal machining center UN-600/30H

 

  • Considerably smaller machine with when compared to other machines with same machining area thanks to the compound X-axis, half of the X-axis stroke is on the machine table, the other half is on the machine column
  • High-speed cutting 

Feedrate (Xaxes [X,Uaxes]/ Y,Zaxes ) 120 m/min[ 60 m/min] / 60 m/min
Acceleration (Xaxes[ X,Uaxes] / Yaxes / Zaxes ) 2.0 G[ 1.0 G] / 1.5 G / 2.0 G

  • The ball screw cooling system and the standard equipment chiller unit which is used to control the temperature of the spindle motor ensure consistent machining accuracy.
  • Prevention of problems caused by the accumulation of machined chips
  • Items requiring frequent access, such as the lubrication and air inlets, are in one central location for convenient maintenance to minimize machine down time
  • Intermittent operation of hydraulic unit with accumulator results in lower electrical power consumption

Maskine specifikationer

Standard Machine Værdi
CAPACITY Maximum workpiece diameter 600 mm
Maximum workpiece height 500 mm
X-axis travel (column right and left) 510 mm
Y-axis travel (spindle up and down) 400 mm
Z-axis travel (table back and forth) 380 mm
SPINDLE (standard) Spindle taper hole 7/24 taper No30
Spindle speed maximum 20,000 min-¹
Main motor (10 minute rating) 18.5 kW
FEED RATES Rapid traverse (X/Y/Z) 120/60/60 m/min
TABLE & PALLET Pallet width 400 mm
Pallet length 400 mm
ATC TOOL MAGAZINE No. of tool pockets (standard) 20
Tool shank MAS BT-30
MACHINE SIZE Width 990 mm
Length 3,265 mm