VORTEX HORIZONTAL PROFILER 160 XP
VORTEX HORIZONTAL PROFILER 160 shown
Designed for the machining of mid to large aerospace components with unsurpassed efficiency.
- Box construction integrates the base, column, and table for the maximum rigidity to ensure high accuracy machining.
- Powerful, high-speed HSK-A63 26000 rpm 45 kW integral spindle/motor is standard equipment.
- High speed simultaneous 5-axis machining thanks to the maximum feedrates of 35/30/30 m/min for the X/Y/Z axes and 50 rpm for the A/C axes both driven by direct-drive motors.
- Large workpiece : capacity table size is 4000 x 1250 mm with maximum load of 3000 kg.
- Symmetrical base/column construction together with advanced coolant and chip disposal system minimizes heat displacement for stable production.
Maskine specifikationer
| Standard Machine | Værdi | |
|---|---|---|
| TRAVEL | X-axis travel (Spindle head right/left) | 4,200 mm |
| Y-axis travel (Spindle head up/down) | 1,500 mm | |
| Z-axis travel (Spindle head back/forth) | 550 mm | |
| A-axis travel | ±100° | |
| C-axis travel (standard) | ±360° continuous | |
| Minimum indexing increment (A/C) | 0.0001 ° | |
| CAPACITY | Maximum workpiece length | 4,000 mm |
| Maximum workpiece width | 1,250 mm | |
| Maximum workpiece height | 500 mm | |
| Maximum table load (uniformly distributed) | 3,000 kg | |
| SPINDLE (STANDARD) | Spindle taper hole | HSK-A63/80mz |
| Rotational speed (maximum) | 30,000 min-¹ | |
| FEEDRATE | Rapid traverse rate X-axis | 35 m/min |
| Rapid traverse rate Y-axis | 30 m/min | |
| Rapid traverse rate Z-axis | 30 m/min | |
| ATC & TOOL MAGAZINE | Tool storage capacity (standard) | 30 |