INTEGREX e-670H
DONE-IN-ONE performance for large workpiece machining
- High performance turning and milling spindle delivers cutting capability across a range of difficult to machine materials
- Fully automatic NC tailstock with 2-position tailstock quill to suit a wide range of shaft work applications
- Long Boring Bar System for deep machining of inner diameters of large workpiece
- Significantly reducing number of operations and work in progress with Ø1050mm swing and 4m bed length consolidating multiple complex operations into a single set-up
Maskine specifikationer
| 3000 mm Bed (Universal) | Værdi | |
|---|---|---|
| CAPACITY | Maximum machining diameter | 1,070 mm |
| TURNING SPINDLE 1 | Rotating speed maximum | 1,600 min-¹ |
| Motor Power 30 minute rating | 45.0 kW | |
| MILLING HEAD | Tool shank type | BT 50 |
| Milling spindle speed maximum | 10,000 min-¹ | |
| FEED AXIS | X axis stroke | 1,025 mm |
| Y axis stroke | 670 mm | |
| Z axis stroke | 3,375 mm | |
| W axis stroke | 2,879 mm | |
| 4000 mm Bed (Universal) | Værdi | |
|---|---|---|
| CAPACITY | Maximum machining diameter | 1,070 mm |
| TURNING SPINDLE 1 | Rotating speed maximum | 1,600 min-¹ |
| Motor Power 30 minute rating | 45.0 kW | |
| MILLING HEAD | Tool shank type | BT 50 |
| Milling spindle speed maximum | 10,000 min-¹ | |
| FEED AXIS | X axis stroke | 1,025 mm |
| Y axis stroke | 670 mm | |
| Z axis stroke | 4,391 mm | |
| W axis stroke | 3,890 mm | |