HCN-6800 NEO
High performance machining center with improved automation compatibility
- Reduced non-cutting times for higher productivity
- Spindle specifications to meet a wide variety of machining requirements
- High rigidity machine construction minimizes machine distortion and ensures high accuracy machining
- Wide variety of automation system available for higher productivity
Spindle
10000 min-1 Standard
Spindle power output is 45 kW (40% ED (30 min.rating)). Designed for high efficiency machining of wide variety of applications from steel to non ferrous material.
Output ( 40% ED ) | 45 kW |
---|---|
Spindle torque ( 40% ED ) | 350 N・m |
8000 min-1 High-torque (Option)
Ensures powerful machining of steel and cast iron. Elimination of drive gears minimizes power loss and spindle vibration, improving machine surface quality, and extend tool life.
Output ( 25% ED ) | 55 kW |
---|---|
Max. torque ( 10% ED ) | 1413 N・m |
16000 min-1 High-speed (Option)
Thanks to the changeable bearing preload, rigidity is ensured during low speed machining as well as high speed machining of aluminum.
Output ( 40% ED ) | 37 kW |
---|---|
Spindle torque ( 40% ED ) | 221 N・m |
Direct Drive Motor table with scale (Option)
World fastest class high speed, high precision direct drive motor table
Efficient, high speed operation thanks to the direct transmission of driving power to the rotary table axis, eliminating power transmission components such as the worm shaft and worm gear. Optimum acceleration / deceleration for inertia caused on the table reduce positioning time.
Pallet size | □630 mm |
---|---|
Minimum indexing angle increment | 0.0001° |
Indexing time (90°) | 1.2 sec*1 |
Bidirectional positioning accuracy | 7.0 sec |
*1 : When inertia is small
Maskine specifikationer
Standard Machine | Værdi | |
---|---|---|
CAPACITY | Maximum workpiece diameter | 1,050 mm |
Maximum workpiece height | 1,300 mm | |
X-axis travel (column right and left) | 1,050 mm | |
Y-axis travel (spindle up and down) | 900 mm | |
Z-axis travel (table back and forth) | 980 mm | |
SPINDLE (standard) | Spindle taper hole | 7/24 taper No. 50 |
Spindle speed maximum | 10,000 min-¹ | |
Main motor (10 minute rating) | 54.0 kW | |
Spindle torque (10%ED) | 532.0 Nm | |
Spindle torque (25%ED) | 443.0 Nm | |
Spindle torque (40%ED) | 350.0 Nm | |
Spindle torque (continuous) | 239.0 Nm | |
FEED RATES | Rapid traverse (X/Y/Z) | 60 m/min. |
TABLE & PALLET | Pallet width | 630 mm |
Pallet length | 630 mm | |
ATC TOOL MAGAZINE | No. of tool pockets (standard) | 43 |
Tool shank | MAS BT-50, CAT 50, DIN 50B BBT50 (MAS, CAT, DIN) HSK-A100 | |
MACHINE SIZE | Width | 3,405 mm |
Length | 6,772 mm |